Flagship capability

Thermal & Remote Infrastructure Monitoring

Fixed radiometric cameras on the assets that matter, with temperature thresholds, alarm escalation and a recorded condition history an auditor can read.

Substation steelwork, busbars and disconnectors standing behind a perimeter fence. — Licensed stock · illustrative

01Demonstration

What the camera sees.

Synthesized demonstration. Not a client site and not a survey record.

Thermal / visual comparator

Synthesized · not a client site

VisualInfrared

25°38°50°63°75°

Ironbow palette · apparent temperature

°C

Three-phase cable termination onto a busbar. Drag to compare the drawing against the infrared frame. Readings are published in full below and do not depend on the slider.

Radiometric spot readings for Three-phase cable termination onto a busbar
Spot	Component	Reading
Sp1	R-phase terminationreference	46.2 °C
Sp2	Y-phase termination	45.1 °C
Sp3	B-phase terminationanomaly	68.6 °C

ΔT vs Sp1

22.4°C

Major discrepancy

Repair immediately. Measured against a similar component under similar loading.

ΔT against band

axis truncated at 32 °C

02Scope

What this covers.

Delivered against

NFPA 70B
ASTM E1934
NETA MTS thermographic survey

Standards worked to. Not a claim of certification — those are listed, with issuing bodies, on the capabilities page as evidence is received.

Fixed radiometric thermal camera installation
Continuous hotspot detection with temperature thresholds
Centralised monitoring and video management
Alarm escalation to control room, SMS and email
Baseline thermal surveys and inspection reporting
Remote site backhaul and power design

03Severity criteria

How an anomaly is classified.

Both reference bases are published here because a threshold quoted without its basis means nothing. Where a comparable component under comparable loading exists, it is the reference — it cancels out ambient and load.

ΔT against a similar component under similar loading
ΔT	Classification	Action
1 °C to 3 °C	Possible deficiency	Warrants investigation.
4 °C to 15 °C	Probable deficiency	Repair as time permits.
> 15 °C	Major discrepancy← measured reading	Repair immediately.

Source ANSI/NETA MTS-2023, Table 100.18, Section 9. A reading is only classifiable against the basis it was measured on. Where a comparable component under comparable loading exists, that is the reference — it cancels out ambient and load. Ambient is the fallback, not the default.

ΔT over ambient air temperature
ΔT	Classification	Action
1 °C to 10 °C	Possible deficiency	Warrants investigation.
11 °C to 20 °C	Probable deficiency	Repair as time permits.
21 °C to 40 °C	Monitor	Monitor until corrective measures can be accomplished.
> 40 °C	Major discrepancy	Repair immediately.

Start with a site survey.

We walk the site, measure it, and come back with a scope and the assumptions written down.

Book a site survey

Licensed stock · illustrative